Faucet is a kind of hardware that has been in use since tap water, and it's also an indispensable hardware in our home. We are already familiar with it. But is your faucet really installed right? In fact, in many families, the installation of faucets is not very standard, and there are some problems, more or less. Kaiping copper faucet manufacturers have summed up five misunderstandings, let's see if we have made such a mistake?
Mistake 1: different functional areas install the same type of faucet
There are many kinds of faucets. According to different functional areas, faucets mainly include basin faucet, bathtub faucet, washing machine faucet and sink faucet. The structure and function of faucets in different functional areas are different. The faucets in basin, sink and bathtub generally use two types of heating and cooling type and bubbler. The faucets of washing machine only need Single cooling faucet is OK, because the water flow of single cooling faucet scours faster, which can play a certain water-saving effect.
Mistake 2: hot and cold water pipes are not separated
In general, the hot and cold water faucets control the mixing ratio of hot and cold water through different opening angles on both sides of the ceramic valve core, and then regulate the water temperature. If there is only cold water pipe, two water inlet hoses can be connected when installing hot and cold water faucets, and the upper angle valve can also play a role.
Mistake 3: angle valve is not used for connection of faucet and water pipe
All hot and cold faucets in the home must be connected to the water pipe with angle valve, in order to prevent the faucet leakage from affecting the water use in other parts of the family. The faucet of the washing machine does not need hot water, so it can be directly connected with the water pipe.
Mistake 4: faucets are not cleaned regularly
Many families never pay attention to the cleaning and maintenance of the faucet after it is installed. As time goes on, not only the water quality of the faucet is not guaranteed, but also various faults will occur, affecting the use. In fact, the correct way is to clean the surface stains and water stains every other month after the installation of the faucet. If there is a thick accumulation of scale inside, just pour white vinegar into the faucet pipe to soak for a while, and then open the hot water valve to drain the water.
Mistake 5: the faucet is not replaced regularly
Generally, the faucet can be replaced after five years of use. If it is used for a long time, it will praise a lot of bacteria and dirt inside. If it is used for a long time, it will cause harm to human body. Therefore, it is recommended to replace the faucet once every five years.
Article source: Kaiping copper faucet manufacturer
07-03
What kind of faucet valve element are there?
1. Ceramic valve core:This is the most popular type of faucet valve core. Compared with other raw materials, the valve core has good sealing performance, good wear resistance and stable physical performance, so its service life is long. Even if the faucet is opened and closed for a long time and frequently, its sealing performance will not be weakened, and the natural faucet will not show water le
07-03
What do you think of the open flat copper faucet as copper or alloy?
In general, copper is brown red, aluminum white is slightly gray, iron gray is slightly black; there are many kinds of zinc alloy, and the alloy elements and shares are different in color. If you want to buy faucets, you'd better go to some shops with good promises. Because there are more and more faucets in the market now, but the quality is getting worse and worse. You will buy faucets with poo
07-03
What kinds of faucets are there?
A tap is a valve that controls the flow of water. The renewal speed of faucet is very fast. It has developed from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control. Now in many families, the stainless steel double temperature double control faucet is used, and the kitchen combined faucet is also presented.Now, more and more
07-03
How to distinguish the material of all copper faucet?
1. Look, the main high-quality copper faucet, after polishing and electroplating, has a bright and bright appearance, which can be seen by light, without corrosion mark or oxidation spot, while the alloy is not. Secondly, carefully observe whether the cross-section interface of the faucet is copper body. It's worth noting that many Philistines, in order to avoid this point, treat the cross-sectio